Connect with us

Published

on

These are the informations you need before choosing RADIOGRAPHY. These are the JAMB subject combination, requirements and the Universities that offer them in Nigeria.

### Jamb Subject Combination For RADIOGRAPHY

Physics, Chemistry and Biology.

## Requirements

### Direct Entry Requirements

(i)     Two (2) ‘A’ Level passes chosen from Physics, Chemistry and Biology.

### UTME Requirements

Five (5) SSC credit passes in English Language, Mathematics, Biology, Physics and Chemistry.

## Institutions That Offer RADIOGRAPHY In Nigeria

• ABU
• BAYERO
• BENIN
• CALABAR
• LAGOS
• LCITY
• MAIDUGURI
• PAMO
• UDU
• UNIZIK
• UNN

Career & Business Strategist, Content creator, JAMB Officer and Academic Instructor. Owner/Founder - CAREERWIZZARD @careerwizzard.com

# PHY 203 Quiz For OAU

Published

on

0%
268
Created by Oluwaferanmi Akinyele

PHY 203 Quiz

These are likely questions for our test based on our class notes, few questions our lecturers asked in class, examples in the notes and some online questions.

This quiz consists of 95 questions covering all the topics we have been taught in PHY 203 till present. I hope we all find it helpful.

You have 50 mins for this quiz.

Contributors: Zainab, Verah & Lammylex (CHM department)

and Shukroh, Great Blakky and Ebun (PHY department)

Goodluck!❤️

1 / 95

1. An ammeter also detects the direction of the flow of current

2 / 95

2. The process of setting up a current to operate a transistor at a desired point on its characteristic curve is known as __________

3 / 95

3. The e–h+ pair can also be called ____

4 / 95

4. In a transformer, most flux which get linked to the secondary winding is called?

5 / 95

5. A emitter-follower circuit has Vcc =12V, Rm = 1KΩ and a 2mA meter. If the amplification factor of the resistor is 80 and Vbe = 0.7. Calculate the suitable r for Rs to give fsd when E= 5V.

6 / 95

6. A meter is protected in the case of accidental workload by connecting …………… in ………….. with a voltmeter

7 / 95

7. The potential barrier of a P-N junction depends on which of the following except

8 / 95

8. Which of the following transformers has a high rating?

9 / 95

9. A transformer consists of two inductive coils namely;

10 / 95

10. A hole can also be described as a _________

11 / 95

11. A capacitor and an Inductor in an AC circuit is referred to as

12 / 95

12. A material that releases an electron from the valence band into the conduction band when a photon of light is incident on it is a ___________

13 / 95

13. Which of the following statements is/are true? I. A multimeter can be used as an ammeter when low resistance is connected in parallel with the galvanometer II. A low sensitive meter will measure Voltage perfectly III. A multimeter cannot be used to determine circuit continuity IV. A multimeter can be used as an voltmeter when high resistance is connected in series with the galvanometer

14 / 95

14. The principle behind the working of a transformer is _________

15 / 95

15. A component that allows the flow of current in only one direction is called ……….

16 / 95

16. The separation between conduction band and valence band on the energy level diagram is called ________

17 / 95

18 / 95

18. The arrangement of atoms in a repetitive manner is known as

19 / 95

19. Circuit elements are connected in parallel when a common ……………. is applied to each elements

20 / 95

20. In a multimeter, when the variable resistance and the fixed resistance are connected in series with the battery and galvanometer, the multimeter functions as

21 / 95

21. The resistivity of a semiconductor is ………. that of an insulator, and …………that of conductors

22 / 95

22. Calculate the current flowing in the circuit

23 / 95

23. A capacitor C and an Inductor L store…………….. and ……………….. respectively

24 / 95

24. A multiplier measures ………………, ………………….. and …………………

25 / 95

25. What type of bonds exist in semiconductors

26 / 95

26. Which of the following is true about the effect of temperature on semiconductors

I. At absolute zero, there are no free electrons.

II. Above absolute zero, bonds break and electrons move under the influence of the applied electric field.

III. The semiconductor has its highest conductivity at absolute zero

IV. The semiconductor behaves as a perfect insulator at absolute zero

27 / 95

27. A galvanometer measures and detects extremely small currents both in ………………… and ………………………

28 / 95

28. The Norton’s equivalent circuit contains a Norton equivalent source “I(N)” in parallel with an equivalent resistor R(N)

29 / 95

29. A inductor stores energy in its _________

30 / 95

30. Which of this must be connected to multimeter to be able to measure AC voltages?

31 / 95

31. Calculate Rth, Vth, and I5

32 / 95

32. Coils are …………… separated, but ……………. linked together

33 / 95

33. The loss due to the reversal of magnetization in the transformer core is known as

34 / 95

34. Consider the following statements and choose only correct answers

I. The resistivity of a semiconductor is less than that of an insulator and more than a conductor

II. As temperature increases, the conductivity of semiconductors decreases

III. We can consider a semiconductor as a resistance material

IV. Semiconductors have a negative temperature coefficient of resistance

35 / 95

35. A semiconductor in an extremely pure form is known as ………….

36 / 95

36. Which of the statements about PN junction is true

I. A PN junction presents a high resistance if forward biased.

II. A PN junction presents a high resistance if reversed biased.

III A PN junction presents a low resistance if forward biased.

IV. A PN junction presents a low resistance if reversed biased.

37 / 95

37. Which of the following is/are correct?

I. Bipolar junction transistors control the current by varying the number of charge carriers

II. Voltage between 2 terminals are indicated by repeated letters

III. The emitter is lightly doped to reduce junction capacitance

IV. The emitter-base junction is forward biased

38 / 95

38. The loss due to ohmic resistance of the transformer windings

39 / 95

39. A node is a collection point for two or more banches

40 / 95

40. Extrinsic semiconductors have more current conducting capacity than intrinsic semiconductors

41 / 95

41. Calculate Ia, Ib and Ic

42 / 95

42. p-type and n-type semiconductor join together to form a …………….. known as …………….

43 / 95

43. Why is a laminated steel core used in a transformer instead of a solid core?

44 / 95

44. A perfect amplifier has all of the following properties except:

45 / 95

45. A mesh is any closed path in a circuit which does not enclose any other closed path inside it

46 / 95

46. To convert a multiplier to an ammeter, a ………. resistance is connected in ……………… with a galvanometer

47 / 95

47. AC Current and Voltage may vary with time. True or False?

48 / 95

48. Depletion layer serves as barrier to the movement of free electrons.

49 / 95

49. Calculate the equivalent resistance

50 / 95

50. The core in a transformer provides ?

51 / 95

51. A variable resistor in an electric circuit is for ……………

52 / 95

52. Which of the following is correct

I. Small changes in V(BE) will produce large current changes in I(C) & I(E)

II. Small changes in V(CE) have little effect on I(B)

III. Small changes in V(CE) will produce large current changes in I(C) & I(E)

I, II, III & IVIV. Small changes in V(BE) will produce large current changes in I(B)

53 / 95

53. A capacitor stores charge and hence, electric energy

54 / 95

54. Copper loss is usually larger than other losses

55 / 95

55. Inductors smoothen sharp sudden changes in ……….

56 / 95

56. The emf that gets induced in the secondary winding according to Faraday’s law of electromagnetic induction is called?

57 / 95

57. Circuit elements connected in series have common …………….. passing through each element

58 / 95

58. Any transistor designed must operate in the ________ region of the characteristic curve

59 / 95

59. What is the number of branches, nodes, loops, and meshes?

60 / 95

60. The transistor is a current __________ device.

61 / 95

61. In a semiconductor, as temperature increases, conductivity ………………

62 / 95

62. A 6600/550V, 25KVA transformer has iron losses of 350W and its 1º and 2° winding resistances are 14.5 and 0.1Ω respectively. Determine the full load efficiency at a power factor of unity.

63 / 95

63. when the sensitivity of a meter is high, it means the meter has ………….

64 / 95

64. Which of these will result in forward biasing

I. when certain dc voltage is applied to the junction in such a direction that it cancels the potential barrier thus permitting the flow of current

II. Connecting the negative terminal of the battery to the p-type and positive terminal to the n-type

III. Connecting the positive terminal of the battery to the p-type and negative terminal to the n-type

IV. when certain dc voltage is applied to the junction in such a direction that the potential barrier is increased

65 / 95

65. The transistor is a three-terminal device that we can use to form a _____________ circuit

66 / 95

66. In checking for continuity of circuit which on these is used

67 / 95

67. The voltage signal at the collector is out of phase with the signal at the base by:

68 / 95

68. A resistor is regarded as a circuit element which puts energy into a circuit

69 / 95

69. In a RC circuit, voltage across the resistor ………………. exponentially with time

70 / 95

70. Inductors are very common in high-frequency circuit

71 / 95

71. Which of this is true

72 / 95

72. …………………. are responsible for the conduction  in a conductor

73 / 95

73. Select the correct options only

I. Pentavalent impurities provide large number of free electrons to the semiconductor.

II. Trivalent impurities provide large number of free electrons to the semiconductor.

III. Trivalent impurities provide large number of holes to the semiconductor.

IV. Pentavalent impurities provide large number of holes to the semiconductor.

74 / 95

74. An Inductor tend to smooth sudden change in ……………..

75 / 95

75. A transformer only increases the voltage with corresponding increase in current

76 / 95

76. Which of the following is/are true

I. Reverse biasing prevents the flow of charge carriers across the junction.

II. Forward biasing is created when the positive terminal is connected to the n-type part of the PN junction.

III. In practice, when we apply reverse biasing to a PN junction, all the charge carriers stops to flow.

77 / 95

77. What is known as eddy current loss in a transformer?

78 / 95

78. When a small amount of trivalent impurity is added to a pure semi conductor, the semi conductor becomes

79 / 95

79. The majority carriers in an n-type semiconductor is ?

80 / 95

80. A Thevenin’s equivalent circuit contains an equivalent source Vth in parallel with an equivalent resistor Rth

81 / 95

81. In an RL circuit voltage across the resistor increases exponentially

82 / 95

82. No electrons can stay in the forbidden gap because

83 / 95

83. A laminated steel core that has high silicon content provides

84 / 95

84. Which of the following is true about transformers?

I. Open circuit test are done with a load on the transformer.

II. Copper loss is due to the ohmic resistance of the transformer windings.

III. Open circuit test is done to determine the ‘no load loss’ of the transformer.

IV. A transformer is electrically linked.

85 / 95

85.

How many branches, nodes, loop and mesh do we have here?

86 / 95

86. The most versatile circuit configuration for transistors is the

87 / 95

87. In pure inductors, current ……… the voltage by ……

88 / 95

88. What are the examples of passive elements?

89 / 95

89. If a circuit has the following parameters Vcc =20V, Rs +Rm = 9.3KΩ, Vbe = 0.7, Im =1mA, and Β = 100. Calculate the meter current when E =10V and the voltmeter input r with or without the transistor.

90 / 95

90. On the basis of their use, transformers are classified as

91 / 95

91. In electronics, _____ refers to the use of DC voltage to establish certain operating conditions for an electronic device.

92 / 95

92. A p-n junction is also known as

93 / 95

93. Voltmeter draws …………………… current

94 / 95

94. ________ converts alternating currents into direct currents

95 / 95

95. The collector current is determined by the _________

The average score is 53%

0%

You can give feedback or questions to the quiz.

Thank you. Feedbacks makes us better!

# Quiz for CSC 201

Published

on

/40
884

You have 30 mins for this quiz

Time up!

Created by Oluwaferanmi Akinyele

CSC 201

Preparatory Quiz for CSC 201 Test 2022/2023. This quiz contains 40 multiple choice questions.

The questions are compiled by Physics department gurus;

Ebun (Class rep)

Levi

Oluwaferanmi

Great

and Blakky

1 / 40

Which one of the following is the use of function in python?

2 / 40

Is Python code compiled or interpreted?

3 / 40

What is the maximum possible length of an identifier in Python?

4 / 40

What are the values of the following Python expressions?

“` 2**(3**2)“`

“` (2**3)**2“`

“` 2**3**2“`

5 / 40

Which of the following variable naming is correct

6 / 40

What are the two main types of functions in Python?

7 / 40

Which of the following functions is a built-in function in python?

8 / 40

What is the average value of the following Python code snippet?

9 / 40

Which of the following is an invalid variable?

10 / 40

Which keyword is used to call a function in Python language?

11 / 40

Who developed Python Programming Language?

12 / 40

Which of the following is used to define a block of code in Python language?

13 / 40

The following are program elements except

14 / 40

Python was created in what year

15 / 40

The outcome of a programming activity is a _________

16 / 40

Operating Systems includes the following except

17 / 40

‘Bit’ stands for

18 / 40

Which of the following is the correct extension of the Python file?

19 / 40

Is Python case sensitive when dealing with identifiers?

20 / 40

Which of the following is true for variable names in Python?

21 / 40

What is the value of the following expression?

“`float(22//3+3/3)“`

22 / 40

The following are high-level languages except

23 / 40

Which among the following list of operators has the highest precedence?

“` +, -, **, %, /, <<, >>, |“`

24 / 40

Which type of Programming does Python support?

25 / 40

Which of the following character is used to give single-line comments in Python?

26 / 40

The following is true about python except

27 / 40

The correct sequence of the history of modern era is

28 / 40

Which of the following is an invalid statement?

29 / 40

Machines developed in mechanical era include the following except

30 / 40

The following are python reserved words excerpt

31 / 40

Machines developed in transistor era include the following except

32 / 40

Application software includes the following except

33 / 40

In flow charts, a terminal is represented with what shape

34 / 40

What is the order of precedence in python?

35 / 40

A computer software comprises of ___________ software & ___________ software

36 / 40

What will be the output of the following Python expression?

“`round(4.576)“`

37 / 40

A ________ is a sequence of instructions telling the computer what to do.

38 / 40

The expression

“`2**2**3“` is equal to “`(2**2)**3“`

39 / 40

What will be the value of X in the following Python expression?

“`X = 2+9*((3*12)-8)/10“`

40 / 40

The ______ is the brain of the computer that performs simple arithmetic & logical operations

The average score is 66%

0%

# PHY 205 Quiz

Published

on

0%
48

OAU PHY 205 Quiz

PHY 205

1 / 34

1. Electrons, being fermions, adhere to which principle that prohibits two electrons from occupying the same quantum state?

2 / 34

2. Which field properties does an electron exhibit due to its charge and motion?

3 / 34

3. What is the relative mass of an electron compared to a proton?

4 / 34

4. What is the electric charge of a positron?

5 / 34

5. What type of process is represented by this equation e† + e¯ → ϒ + ϒ

6 / 34

6. Wavelength is inversely proportional to an object’s mass

7 / 34

7. What is the intrinsic angular momentum (spin) value of an electron?

8 / 34

8. Which branch of physics is concerned with the quantization of energy and its effects on the interaction of matter and energy?

9 / 34

9. Which of the following is not quantized?

10 / 34

10. Which of the following statements is TRUE?

11 / 34

11. Which of the following statements about electrons within an atom is true?

12 / 34

12. What term is used to describe the lowest energy state that an electron can occupy within an atom?

13 / 34

13. Electrons absorbs energy in form of photons as they are accelerated

14 / 34

1. What type of radiation can be produced using cathode ray tubes?

15 / 34

2. Why is it necessary for the tube to be in a vacuum during thermionic emission?

16 / 34

3. High beam of cathode ray in vacuum tube can be steered and manipulated by

17 / 34

4. What happens when a metal wire is heated in a vacuum during thermionic emission?

18 / 34

5. In what devices are cathode ray tubes commonly used?

19 / 34

6. In Thompson’s experiment, a a beam of electron travelling at 6.8 x 10^7m/s is bent into a circular path of radius 4cm in the magnetic of induction 10^-2 W/m2. Find the specific charge to mass (e/m)

20 / 34

7. What is thermionic emission?

21 / 34

1. What is the significance of alpha particle scattering experiments in Rutherford's model?

22 / 34

2. According to quantum mechanics, what is the alternate view of electromagnetic radiation (EMR)?

23 / 34

3. In electromagnetic waves, how do the electrical and magnetic components oscillate?

24 / 34

4. What is the primary reason for the scattering of alpha particles in Rutherford's model?

25 / 34

5. Arrange the following types of electromagnetic radiation in order of increasing wavelength

26 / 34

6. In quantum mechanics, what role does a photon play in the electromagnetic field?

27 / 34

7. How are the electrons distributed in Thomson's model?

28 / 34

8. If the dimensions of the nucleus are small enough, what can happen to alpha particles passing very near the nucleus in Rutherford's model?

29 / 34

9. In Rutherford's model, where is the positive charge concentrated?

30 / 34

10. What is a photon?

31 / 34

11. What are electromagnetic waves?

32 / 34

12. Arrange the following types of electromagnetic radiation in order of increasing frequency:

33 / 34

13. How do the oscillations of the electrical and magnetic components in electromagnetic waves relate to the direction of propagation?

34 / 34

14. In Thomson's model, where are the negatively charged electrons located?

The average score is 66%

0%

# OAU PHY 203 Class Notes

Published

on

This PDF is the class notes for OAU  PHY 203 during the 2022/2023 session.

It encompasses topics ranging from circuit theory and network theorems to Thevenin’s and Norton’s theorems, progressing further into AC circuits, transformers, physics of active devices, semiconductors, and more.

I will continually update this file as we proceed through the classes. Thank you.

### RECOMMENDED:

[mailpoet_form id="1"]