Connect with us

# METEOROLOGICAL INSTITUTE OF SCIENCE AND TECHNOLOGY, KATSINA (MISTECH) – List Of Courses

Published

on

## METEOROLOGICAL INSTITUTE OF SCIENCE AND TECHNOLOGY, KATSINA (MISTECH) – List Of Courses

MISTECH Courses are listed below. The JAMB subject combination, subject requirements and combinations for each course, and other institutions that offer them can be found in the “COURSES” section. You can as well click on each course to view its info.

### “MISTECH” – Programmes:

• CLIMATE CHANGE SCIENCES
• CLIMATE CHANGE SCIENCES
• METEOROLOGY
• METEOROLOGY

# PHY 203 Quiz For OAU

Published

on

0%
268
Created by Oluwaferanmi Akinyele

PHY 203 Quiz

These are likely questions for our test based on our class notes, few questions our lecturers asked in class, examples in the notes and some online questions.

This quiz consists of 95 questions covering all the topics we have been taught in PHY 203 till present. I hope we all find it helpful.

You have 50 mins for this quiz.

Contributors: Zainab, Verah & Lammylex (CHM department)

and Shukroh, Great Blakky and Ebun (PHY department)

Goodluck!❤️

1 / 95

1. Which of these will result in forward biasing

I. when certain dc voltage is applied to the junction in such a direction that it cancels the potential barrier thus permitting the flow of current

II. Connecting the negative terminal of the battery to the p-type and positive terminal to the n-type

III. Connecting the positive terminal of the battery to the p-type and negative terminal to the n-type

IV. when certain dc voltage is applied to the junction in such a direction that the potential barrier is increased

2 / 95

2. Which of the following is/are true

I. Reverse biasing prevents the flow of charge carriers across the junction.

II. Forward biasing is created when the positive terminal is connected to the n-type part of the PN junction.

III. In practice, when we apply reverse biasing to a PN junction, all the charge carriers stops to flow.

3 / 95

3. The principle behind the working of a transformer is _________

4 / 95

4. ________ converts alternating currents into direct currents

5 / 95

5. A laminated steel core that has high silicon content provides

6 / 95

6. In a RC circuit, voltage across the resistor ………………. exponentially with time

7 / 95

7. Inductors are very common in high-frequency circuit

8 / 95

8. Coils are …………… separated, but ……………. linked together

9 / 95

9. Which of the statements about PN junction is true

I. A PN junction presents a high resistance if forward biased.

II. A PN junction presents a high resistance if reversed biased.

III A PN junction presents a low resistance if forward biased.

IV. A PN junction presents a low resistance if reversed biased.

10 / 95

10. The Norton’s equivalent circuit contains a Norton equivalent source “I(N)” in parallel with an equivalent resistor R(N)

11 / 95

11. Extrinsic semiconductors have more current conducting capacity than intrinsic semiconductors

12 / 95

12. The most versatile circuit configuration for transistors is the

13 / 95

13. Why is a laminated steel core used in a transformer instead of a solid core?

14 / 95

14. What are the examples of passive elements?

15 / 95

15. Which of this is true

16 / 95

16. A node is a collection point for two or more banches

17 / 95

17. Which of the following is true about transformers?

I. Open circuit test are done with a load on the transformer.

II. Copper loss is due to the ohmic resistance of the transformer windings.

III. Open circuit test is done to determine the ‘no load loss’ of the transformer.

IV. A transformer is electrically linked.

18 / 95

18. A resistor is regarded as a circuit element which puts energy into a circuit

19 / 95

19. The potential barrier of a P-N junction depends on which of the following except

20 / 95

20. When a small amount of trivalent impurity is added to a pure semi conductor, the semi conductor becomes

21 / 95

21. In a semiconductor, as temperature increases, conductivity ………………

22 / 95

22. The emf that gets induced in the secondary winding according to Faraday’s law of electromagnetic induction is called?

23 / 95

23. If a circuit has the following parameters Vcc =20V, Rs +Rm = 9.3KΩ, Vbe = 0.7, Im =1mA, and Β = 100. Calculate the meter current when E =10V and the voltmeter input r with or without the transistor.

24 / 95

24. Any transistor designed must operate in the ________ region of the characteristic curve

25 / 95

25. AC Current and Voltage may vary with time. True or False?

26 / 95

26. A capacitor stores charge and hence, electric energy

27 / 95

27.

How many branches, nodes, loop and mesh do we have here?

28 / 95

28. Calculate the equivalent resistance

29 / 95

29. when the sensitivity of a meter is high, it means the meter has ………….

30 / 95

30. Select the correct options only

I. Pentavalent impurities provide large number of free electrons to the semiconductor.

II. Trivalent impurities provide large number of free electrons to the semiconductor.

III. Trivalent impurities provide large number of holes to the semiconductor.

IV. Pentavalent impurities provide large number of holes to the semiconductor.

31 / 95

31. Calculate Ia, Ib and Ic

32 / 95

32. On the basis of their use, transformers are classified as

33 / 95

33. Calculate the current flowing in the circuit

34 / 95

34. A capacitor and an Inductor in an AC circuit is referred to as

35 / 95

35. No electrons can stay in the forbidden gap because

36 / 95

36. Consider the following statements and choose only correct answers

I. The resistivity of a semiconductor is less than that of an insulator and more than a conductor

II. As temperature increases, the conductivity of semiconductors decreases

III. We can consider a semiconductor as a resistance material

IV. Semiconductors have a negative temperature coefficient of resistance

37 / 95

37. Circuit elements are connected in parallel when a common ……………. is applied to each elements

38 / 95

38. A variable resistor in an electric circuit is for ……………

39 / 95

39. Copper loss is usually larger than other losses

40 / 95

40. The separation between conduction band and valence band on the energy level diagram is called ________

41 / 95

41. A inductor stores energy in its _________

42 / 95

42. A p-n junction is also known as

43 / 95

43. The e–h+ pair can also be called ____

44 / 95

44. The collector current is determined by the _________

45 / 95

45. Which of the following transformers has a high rating?

46 / 95

46. A capacitor C and an Inductor L store…………….. and ……………….. respectively

47 / 95

47. In a multimeter, when the variable resistance and the fixed resistance are connected in series with the battery and galvanometer, the multimeter functions as

48 / 95

48. A 6600/550V, 25KVA transformer has iron losses of 350W and its 1º and 2° winding resistances are 14.5 and 0.1Ω respectively. Determine the full load efficiency at a power factor of unity.

49 / 95

49. In checking for continuity of circuit which on these is used

50 / 95

50. The loss due to ohmic resistance of the transformer windings

51 / 95

51. A component that allows the flow of current in only one direction is called ……….

52 / 95

52. A hole can also be described as a _________

53 / 95

53. Which of this must be connected to multimeter to be able to measure AC voltages?

54 / 95

54. What is known as eddy current loss in a transformer?

55 / 95

55. A meter is protected in the case of accidental workload by connecting …………… in ………….. with a voltmeter

56 / 95

56. A transformer only increases the voltage with corresponding increase in current

57 / 95

57. A Thevenin’s equivalent circuit contains an equivalent source Vth in parallel with an equivalent resistor Rth

58 / 95

58. The arrangement of atoms in a repetitive manner is known as

59 / 95

59. A semiconductor in an extremely pure form is known as ………….

60 / 95

60. What is the number of branches, nodes, loops, and meshes?

61 / 95

61. Which of the following is/are correct?

I. Bipolar junction transistors control the current by varying the number of charge carriers

II. Voltage between 2 terminals are indicated by repeated letters

III. The emitter is lightly doped to reduce junction capacitance

IV. The emitter-base junction is forward biased

62 / 95

62. Depletion layer serves as barrier to the movement of free electrons.

63 / 95

63. In pure inductors, current ……… the voltage by ……

64 / 95

64. The process of setting up a current to operate a transistor at a desired point on its characteristic curve is known as __________

65 / 95

65. A multiplier measures ………………, ………………….. and …………………

66 / 95

66. The majority carriers in an n-type semiconductor is ?

67 / 95

67. What type of bonds exist in semiconductors

68 / 95

68. Inductors smoothen sharp sudden changes in ……….

69 / 95

69. Which of the following is correct

I. Small changes in V(BE) will produce large current changes in I(C) & I(E)

II. Small changes in V(CE) have little effect on I(B)

III. Small changes in V(CE) will produce large current changes in I(C) & I(E)

I, II, III & IVIV. Small changes in V(BE) will produce large current changes in I(B)

70 / 95

70. The voltage signal at the collector is out of phase with the signal at the base by:

71 / 95

71. A perfect amplifier has all of the following properties except:

72 / 95

72. Voltmeter draws …………………… current

73 / 95

73. The loss due to the reversal of magnetization in the transformer core is known as

74 / 95

74. An Inductor tend to smooth sudden change in ……………..

75 / 95

75. Circuit elements connected in series have common …………….. passing through each element

76 / 95

76. In a transformer, most flux which get linked to the secondary winding is called?

77 / 95

77. A mesh is any closed path in a circuit which does not enclose any other closed path inside it

78 / 95

78. A emitter-follower circuit has Vcc =12V, Rm = 1KΩ and a 2mA meter. If the amplification factor of the resistor is 80 and Vbe = 0.7. Calculate the suitable r for Rs to give fsd when E= 5V.

79 / 95

79. To convert a multiplier to an ammeter, a ………. resistance is connected in ……………… with a galvanometer

80 / 95

80. …………………. are responsible for the conduction  in a conductor

81 / 95

81. The transistor is a three-terminal device that we can use to form a _____________ circuit

82 / 95

82. The transistor is a current __________ device.

83 / 95

83. A material that releases an electron from the valence band into the conduction band when a photon of light is incident on it is a ___________

84 / 95

84. A galvanometer measures and detects extremely small currents both in ………………… and ………………………

85 / 95

86 / 95

86. A transformer consists of two inductive coils namely;

87 / 95

87. The resistivity of a semiconductor is ………. that of an insulator, and …………that of conductors

88 / 95

88. In electronics, _____ refers to the use of DC voltage to establish certain operating conditions for an electronic device.

89 / 95

89. Which of the following statements is/are true? I. A multimeter can be used as an ammeter when low resistance is connected in parallel with the galvanometer II. A low sensitive meter will measure Voltage perfectly III. A multimeter cannot be used to determine circuit continuity IV. A multimeter can be used as an voltmeter when high resistance is connected in series with the galvanometer

90 / 95

90. The core in a transformer provides ?

91 / 95

91. Calculate Rth, Vth, and I5

92 / 95

92. In an RL circuit voltage across the resistor increases exponentially

93 / 95

93. Which of the following is true about the effect of temperature on semiconductors

I. At absolute zero, there are no free electrons.

II. Above absolute zero, bonds break and electrons move under the influence of the applied electric field.

III. The semiconductor has its highest conductivity at absolute zero

IV. The semiconductor behaves as a perfect insulator at absolute zero

94 / 95

94. p-type and n-type semiconductor join together to form a …………….. known as …………….

95 / 95

95. An ammeter also detects the direction of the flow of current

The average score is 53%

0%

You can give feedback or questions to the quiz.

Thank you. Feedbacks makes us better!

# Quiz for CSC 201

Published

on

/40
882

You have 30 mins for this quiz

Time up!

Created by Oluwaferanmi Akinyele

CSC 201

Preparatory Quiz for CSC 201 Test 2022/2023. This quiz contains 40 multiple choice questions.

The questions are compiled by Physics department gurus;

Ebun (Class rep)

Levi

Oluwaferanmi

Great

and Blakky

1 / 40

What is the order of precedence in python?

2 / 40

What are the two main types of functions in Python?

3 / 40

The expression

“`2**2**3“` is equal to “`(2**2)**3“`

4 / 40

Who developed Python Programming Language?

5 / 40

Machines developed in transistor era include the following except

6 / 40

What is the average value of the following Python code snippet?

7 / 40

The following are python reserved words excerpt

8 / 40

A ________ is a sequence of instructions telling the computer what to do.

9 / 40

The outcome of a programming activity is a _________

10 / 40

Operating Systems includes the following except

11 / 40

What will be the output of the following Python expression?

“`round(4.576)“`

12 / 40

Which of the following is an invalid variable?

13 / 40

What are the values of the following Python expressions?

“` 2**(3**2)“`

“` (2**3)**2“`

“` 2**3**2“`

14 / 40

Which among the following list of operators has the highest precedence?

“` +, -, **, %, /, <<, >>, |“`

15 / 40

Which type of Programming does Python support?

16 / 40

Machines developed in mechanical era include the following except

17 / 40

Which of the following variable naming is correct

18 / 40

Is Python case sensitive when dealing with identifiers?

19 / 40

The following are program elements except

20 / 40

The correct sequence of the history of modern era is

21 / 40

Which one of the following is the use of function in python?

22 / 40

Is Python code compiled or interpreted?

23 / 40

The following is true about python except

24 / 40

Which of the following functions is a built-in function in python?

25 / 40

Which of the following is an invalid statement?

26 / 40

Application software includes the following except

27 / 40

‘Bit’ stands for

28 / 40

What is the maximum possible length of an identifier in Python?

29 / 40

Which of the following is the correct extension of the Python file?

30 / 40

Which of the following character is used to give single-line comments in Python?

31 / 40

In flow charts, a terminal is represented with what shape

32 / 40

Python was created in what year

33 / 40

Which keyword is used to call a function in Python language?

34 / 40

Which of the following is used to define a block of code in Python language?

35 / 40

What will be the value of X in the following Python expression?

“`X = 2+9*((3*12)-8)/10“`

36 / 40

What is the value of the following expression?

“`float(22//3+3/3)“`

37 / 40

Which of the following is true for variable names in Python?

38 / 40

The following are high-level languages except

39 / 40

A computer software comprises of ___________ software & ___________ software

40 / 40

The ______ is the brain of the computer that performs simple arithmetic & logical operations

The average score is 66%

0%

# PHY 205 Quiz

Published

on

0%
48

OAU PHY 205 Quiz

PHY 205

1 / 34

1. Electrons, being fermions, adhere to which principle that prohibits two electrons from occupying the same quantum state?

2 / 34

2. What type of process is represented by this equation e† + e¯ → ϒ + ϒ

3 / 34

3. What is the intrinsic angular momentum (spin) value of an electron?

4 / 34

4. Which of the following statements about electrons within an atom is true?

5 / 34

5. What is the electric charge of a positron?

6 / 34

6. Wavelength is inversely proportional to an object’s mass

7 / 34

7. Which branch of physics is concerned with the quantization of energy and its effects on the interaction of matter and energy?

8 / 34

8. What is the relative mass of an electron compared to a proton?

9 / 34

9. Electrons absorbs energy in form of photons as they are accelerated

10 / 34

10. Which field properties does an electron exhibit due to its charge and motion?

11 / 34

11. Which of the following statements is TRUE?

12 / 34

12. Which of the following is not quantized?

13 / 34

13. What term is used to describe the lowest energy state that an electron can occupy within an atom?

14 / 34

1. What is thermionic emission?

15 / 34

2. Why is it necessary for the tube to be in a vacuum during thermionic emission?

16 / 34

3. What type of radiation can be produced using cathode ray tubes?

17 / 34

4. In Thompson’s experiment, a a beam of electron travelling at 6.8 x 10^7m/s is bent into a circular path of radius 4cm in the magnetic of induction 10^-2 W/m2. Find the specific charge to mass (e/m)

18 / 34

5. In what devices are cathode ray tubes commonly used?

19 / 34

6. What happens when a metal wire is heated in a vacuum during thermionic emission?

20 / 34

7. High beam of cathode ray in vacuum tube can be steered and manipulated by

21 / 34

1. Arrange the following types of electromagnetic radiation in order of increasing wavelength

22 / 34

2. How do the oscillations of the electrical and magnetic components in electromagnetic waves relate to the direction of propagation?

23 / 34

3. According to quantum mechanics, what is the alternate view of electromagnetic radiation (EMR)?

24 / 34

4. Arrange the following types of electromagnetic radiation in order of increasing frequency:

25 / 34

5. In quantum mechanics, what role does a photon play in the electromagnetic field?

26 / 34

6. In electromagnetic waves, how do the electrical and magnetic components oscillate?

27 / 34

7. How are the electrons distributed in Thomson's model?

28 / 34

8. In Thomson's model, where are the negatively charged electrons located?

29 / 34

9. What are electromagnetic waves?

30 / 34

10. If the dimensions of the nucleus are small enough, what can happen to alpha particles passing very near the nucleus in Rutherford's model?

31 / 34

11. What is the significance of alpha particle scattering experiments in Rutherford's model?

32 / 34

12. What is a photon?

33 / 34

13. In Rutherford's model, where is the positive charge concentrated?

34 / 34

14. What is the primary reason for the scattering of alpha particles in Rutherford's model?

The average score is 66%

0%

# OAU PHY 203 Class Notes

Published

on

This PDF is the class notes for OAU  PHY 203 during the 2022/2023 session.

It encompasses topics ranging from circuit theory and network theorems to Thevenin’s and Norton’s theorems, progressing further into AC circuits, transformers, physics of active devices, semiconductors, and more.

I will continually update this file as we proceed through the classes. Thank you.

### RECOMMENDED:

[mailpoet_form id="1"]